Your location: Home -> Information dynamic -> Industry news

6-Row Standard Warp Stop Motion for Picanol Shuttleless Loom

Source:www.cscx88.com      Release date: 2026-10-27
During the weaving process of shuttleless looms, warp breakage constitutes a major factor affecting fabric quality and weaving efficiency. If the loom keeps running after a warp yarn breaks, the broken end will be rolled into the fabric and cause defects, which will increase time‑consuming fabric mending work afterwards.

      During the weaving process of shuttleless looms, warp breakage constitutes a major factor affecting fabric quality and weaving efficiency. If the loom keeps running after a warp yarn breaks, the broken end will be rolled into the fabric and cause defects, which will increase time‑consuming fabric mending work afterwards. As a warp‑yarn condition monitoring component for looms, the warp stop device triggers a stop signal upon warp breakage to halt the loom in time for operators to re‑tie broken yarns. The Standard 6‑Row Warp Stop Motion for Picanol Loom, a warp‑break detection spare part for shuttleless looms, meets the warp monitoring requirements of Picanol looms and supplies supporting warp‑break detection components for weaving workshops in textile mills.

      This warp stop device adopts a 6‑row drop‑wire arrangement. Warp yarns pass through gaps between drop wires. Under normal weaving with sustained warp tension, the drop wires remain in position. When a warp breaks, the corresponding drop wire loses support and falls down, activating the sensor unit to send out a stop signal. The device is engineered to match the mounting interface of Picanol looms and can be fitted with the original warp‑stop mechanism while conforming to the loom’s warp passage layout. Drop wires are made of metal with stable surface treatment, resisting deformation in long‑term service and maintaining good condition at yarn‑friction contact points. Boasting a rugged overall construction, the unit delivers reliable sensor response and timely stop‑signal transmission at high loom speeds, suitable for continuous‑operation weaving workshops.

      In cotton weaving applications, warp yarn density is relatively high, and yarn hairiness together with neps and impurities tend to induce warp breaks. Mounted in the warp zone of the loom, the Standard 6‑Row Warp Stop Motion for Picanol Loom detects breakages and triggers an immediate stop to minimize fabric defects caused by broken yarn being woven‑in. After operators fix broken ends and restart the loom, the device automatically resets for seamless weaving resumption. Where multiple looms run simultaneously in cotton mills, consistent sensing performance lowers fabric‑quality risks from missed breakage detection, well‑suited for mass‑production cotton weaving workshops.

      For chemical‑fiber weaving, filament warp yarns feature high tensile strength yet smooth surfaces. The contact condition between the warp stop device and warp yarns determines sensing reliability. The standard 6‑row warp stop motion is structurally adapted for filament passage with evenly‑arranged drop wires to ensure stable detection during chemical‑filament weaving. Chemical‑fiber fabrics usually have wide widths and large warp counts, and the 6‑row layout achieves full coverage of warp‑monitoring zones. With robust mechanical performance, the device maintains reliable sensing at high weaving speeds to support high‑volume production of chemical‑fiber fabrics.

      In retrofit and spare‑part replacement scenarios, many in‑service Picanol looms in textile mills have been operating for years. Their original warp‑stop assemblies suffer wear and aging, resulting in reduced sensitivity, delayed breakage response or missed alarms. Designed according to original‑equipment mounting dimensions, the standard 6‑row warp stop motion serves as a direct replacement for existing warp stop frames with easy installation and adjustment. After replacement, loom warp‑monitoring function is restored with prompt break‑stopping response, reducing fabric defects stemming from aged warp‑stop hardware. Uniform part specifications raise on‑site installation efficiency when textile mills replace warp‑stop devices across multiple looms, satisfying equipment maintenance and replacement demands in weaving workshops.

      For multi‑variety weaving with frequent product switching, textile mills change fabric types according to orders. Different fabrics vary in warp density and raw‑material properties, and the adaptability of warp‑stop hardware influences change‑over efficiency. The standard 6‑row warp stop motion accommodates a wide range of warp specifications. Threading warp yarns through drop wires and parameter adjustment are quick during product transitions, cutting downtime for style change‑overs. Its user‑friendly operation fits production rhythms in workshops with frequent style switching and helps looms resume production rapidly for new fabric orders.

      Manufacturing of the Standard 6‑Row Warp Stop Motion for Picanol Loom follows standardized textile‑spare‑part processing workflows covering drop‑wire stamping, frame machining and final assembly. Every production stage is subject to strict process control. Finished units undergo fit‑checks and functional sensing tests to guarantee loom‑compatible performance. Original‑equipment‑equivalent mounting dimensions are available, and model‑specific configurations can be offered for different loom types. It caters to procurement needs from weaving workshops, textile‑machinery spare‑part distributors and equipment‑maintenance departments of weaving mills.sm