During textile weaving production, warp yarns run continuously at high speed. If the loom keeps operating after yarn breakage, missing warp defects will form on the grey fabric, resulting in raw material loss. As a loom accessory assembly, the warp stop device works in conjunction with warp stop strips and drop wires to detect warp breakage signals and halt loom operation. The CXT-P7100-6 Warp Stop Strip is a core component inside the warp stop frame. It adopts a composite structure with electrodes and insulating layers, suitable for installation on warp stop frames of shuttleless looms, and provides hardware support for warp breakage monitoring in various fabric weaving applications.
The CXT-P7100-6 Warp Stop Strip is formed by combining metal conductive electrodes and an insulating protective layer. Its grooved structure allows drop wires to slide and insert smoothly and reduces jamming of drop wires. During normal weaving, warp yarns lift the drop wires so that the electrodes remain disconnected. When a warp yarn breaks, the drop wire falls under its own weight, touching both sets of electrodes on the warp stop strip, closing the circuit and sending a signal to the loom control unit to trigger shutdown. The surface protective layer resists erosion from workshop dust and moisture, keeping the conductive structure stable during long continuous operation and minimizing false shutdowns caused by abnormal signals. Its specifications match the warp stop frame of corresponding loom models. Installation and disassembly are convenient, and less time is spent replacing parts during equipment maintenance, shortening loom downtime.
In the weaving of cotton grey fabric, cotton warp yarns have limited toughness and tend to break under high-speed weaving conditions. Multiple looms run in shifts in textile workshops, and weavers need to monitor several machines simultaneously, making real-time inspection of every single warp yarn impossible. When fitted into the warp stop frame, the CXT-P7100-6 Warp Stop Strip triggers loom shutdown immediately upon warp breakage, lowering the output of defective fabric with missing warp ends. During peak periods of bulk weaving orders in cotton mills, equipment runs for extended hours. The warp stop strip withstands the cotton lint and dust environment in workshops; simple air blowing is sufficient for routine cleaning to maintain continuous operation of the entire warp stop assembly.
For weaving chemical fiber and blended fabrics, the friction coefficient of chemical fiber warp yarns varies, which easily causes tangled yarns and warp breakage during weaving. Chemical fiber fabrics are widely used for apparel and home textile materials, which require strict surface quality. Tiny missing warp defects will negatively affect subsequent printing and dyeing processes. The CXT-P7100-6 Warp Stop Strip is assembled with the warp stop frame to reliably identify warp breakage signals and stop the loom promptly. Compatible with weaving processes of different warp densities, this component fits production lines for chemical fiber fabrics and blended fabrics.
In industrial fabric weaving, filter fabrics and geotextiles feature wide widths with a large number of warp yarns across the full width, bringing heavier loads to the weaving process. Wide-width looms fitted with CXT-P7100-6 Warp Stop Strips on warp stop frames have multiple monitoring points arranged along the fabric width to monitor the status of all warp yarns. Industrial fabrics are used for engineering projects and demand high fabric integrity. Unattended warp breakage leads to long strip defects, rendering the whole roll of grey fabric unusable for subsequent processing. The warp stop strip, working together with the complete warp stop frame, reduces defective fabric formation during wide-width weaving.
For renovation and upgrading of old looms, original warp stop frame components become aged and generate unstable signal feedback. Workshops plan part replacement to improve warp breakage monitoring performance. The CXT-P7100-6 Warp Stop Strip serves as a replacement part and directly matches warp stop frames of corresponding models, without extensive modification to the main loom structure. Textile mills can purchase parts in batches during equipment maintenance cycles and replace worn warp stop strips to quickly restore the functionality of warp stop devices. The renovation process is straightforward, meeting equipment upgrade demands of small and medium weaving factories.
Production of the CXT-P7100-6 Warp Stop Strip follows textile accessory manufacturing procedures. Standardized controls are implemented across all stages, including substrate cutting, insulating coating treatment and finished product inspection. Finished products undergo power-on and assembly tests to verify conductive performance and structural compatibility. The component fits warp stop frames of various looms. Associated textile accessories such as drop wires can be supplied together, enabling textile enterprises to purchase complete warp stop assembly parts in one order. Products are supplied to weaving mills and textile accessory distributors. Bulk orders can be arranged for production, catering to routine maintenance of weaving workshops and purchasing for new loom supporting parts.