Your location: Home -> Information dynamic -> Industry news

What supporting working conditions of conveyor equipment can the CXT-JAT600-103 intermediate bracket

Source:www.cscx88.com      Release date: 2026-11-17
During the operation of the belt conveyor system, the loads from the conveyor belt, idlers and materials need to be shared by stable intermediate supporting components. The bracket structure in the middle of the conveyor line directly affects the running condition of the belt. The CXT-JAT600-103 intermediate bracket adopts a welded frame structure to carry the trough idler sets.

      During the operation of the belt conveyor system, the loads from the conveyor belt, idlers and materials need to be shared by stable intermediate supporting components. The bracket structure in the middle of the conveyor line directly affects the running condition of the belt. The CXT-JAT600-103 intermediate bracket adopts a welded frame structure to carry the trough idler sets. Installed in the middle section of the conveyor line, it restricts the forming angle of the conveyor belt and bears the load generated by material transportation. It is suitable for erection and renovation projects of bulk material belt conveyors.

      Long-distance conveying lines in sand and aggregate production lines are a common application scenario for this intermediate bracket. Sand and stone materials have sharp edges and will generate impact during material dropping. The belt continuously bears the weight of stones, and the belt tends to sag in the middle section of the conveying line. The CXT-JAT600-103 intermediate bracket fixes the position of idlers, maintains the trough shape of the conveyor belt and reduces belt sag. When stones fall from the silo and impact the belt, the load is transferred to the conveyor frame through the bracket, lowering the instantaneous impact on idlers and belts. It fits continuous conveying lines in sand quarries.

      This intermediate bracket can also be applied to coal handling conveyor systems in power plants. Coal conveying lines have high dust concentration and run continuously for a long time, so components must withstand constant vibration. Featuring a robust structure, the CXT-JAT600-103 intermediate bracket reserves sufficient space for idler mounting. Worn idlers can be replaced directly on the bracket without disassembling the entire conveyor frame. The bracket surface is treated for protection to mitigate corrosion caused by coal powder adhesion, making it suitable for intermediate support of 24-hour non-stop coal conveying lines in power plants.

      For grain storage and transfer belt lines, the CXT-JAT600-103 intermediate bracket supports the transportation of granular materials such as grains, corn and wheat. Grain materials have relatively light self-weight, but the conveying lines feature large spans with limited space in transfer galleries. The intermediate bracket occupies little lateral space and can be densely arranged inside galleries to stabilize the conveyor belt and prevent grain spillage during transportation. For new grain 库 lines or renovation of old conveyor equipment, it can directly match existing frame hole positions to shorten on-site installation time.

      Cement raw material conveying conditions: a large amount of powder particles float in the environment, which easily accumulate on components and cause wear after long-term operation. The CXT-JAT600-103 intermediate bracket has few structural gaps. Dust attached to its surface can be cleaned easily. The positioning grooves firmly secure the idler sets and keep idlers coaxial during continuous material conveying, reducing the probability of belt deviation. It is suitable for middle-section belt support for raw material transportation and short-distance clinker transfer in cement plants.

      Outdoor bulk material conveying lines at ports are exposed to wind, rain and saline marine moisture. The CXT-JAT600-103 intermediate bracket can be installed in the middle section of belts for ship loading and unloading at docks. It withstands continuous loads during material handling and resists corrosion from outdoor environments. For sectionally erected conveying lines, brackets can be arranged sequentially at standard intervals for convenient on-site sectional assembly, suitable for building temporary conveying lines at ports.

      For in-plant short-distance conveyor renovation projects, deformed old conveyor supports can be replaced with the CXT-JAT600-103 intermediate bracket. The renovation does not require manufacturing an entirely new frame; only the intermediate supporting components are replaced. The idler mounting interfaces remain consistent, fitting small-scale upgrading of conveyor equipment. When switching production between different materials, the bracket structure will not be affected by material types and can continuously provide middle-section support for belt conveying.